You asked for Pozi-drive. We got to work.

Our customers spend time at the workbench, swapping bindings, building new setups, and putting their hardware to use. When you tell us what would make that job better, we pay attention.

That's the story behind Quiver Killer Pozi-drive fastener kits. A customer-requested upgrade to the screws that connect your bindings to your QK inserts. Small hardware. A change that matters every time you put a driver to it.

A better connection starts at the driver

A removable binding setup means working with your fasteners more than once. The drive interface isn't an afterthought. It's the part you engage every time a binding comes off or goes back on.

Our move to Pozi-drive is about improving that everyday interaction: a purpose-matched screw and driver interface for the job at hand. It's an upgrade to how you work with the fastener.

Pozi-drive isn't Phillips

They can look similar at a glance, but Pozi-drive and Phillips are different drive profiles. Use the correct Pozi-drive bit in the correct size for a Pozi-drive fastener, rather than reaching for a Phillips bit because it happens to be nearby.

Check the fastener, match the bit, and make sure it seats properly before applying force. A worn or mismatched driver doesn't belong in a carefully built setup.

Binding-specific hardware. Not a handful of generic screws.

The drive is only one part of the equation. Your binding still needs the correct screw length, head style, and fit for the mounting stack.

Our Fastener Kits by Binding are selected by binding model, with enough fasteners to outfit one pair of skis. Choose your exact model before adding the kit to your cart.

Shims, risers, and adapter plates can change what you need. Tell us about those before ordering. Same binding name doesn't always mean the same complete setup.

Does every QK kit use Pozi-drive?

Not necessarily. Some bindings require custom or non-standard fasteners, and we may continue to supply Phillips screws for those applications. Getting the correct fit for the binding comes first.

If Pozi-drive is a specific requirement for your order, contact us with your exact binding model so we can confirm the hardware supplied for that kit. Don't assume every screw in every kit has changed.

Already running Quiver Killer inserts?

If you're looking to update your binding fasteners, start with the exact binding and any accessories in the mounting stack. Confirm the replacement kit is appropriate for your existing setup before swapping hardware.

A fastener kit contains the binding screws, not inserts or installation tools. You don't need to order another complete installation kit just to ask about a fastener upgrade.

New mount? Use the two-step ordering flow.

Start by choosing your install kit, then follow through to the fasteners for your binding. Starter Kit if you need the installation tools. Re-Up Kit if you already have them.

Before checkout, confirm your binding selection, insert count, and any shim or accessory requirements. Looking specifically for Pozi-drive? Check with us about your kit before placing the order.

Two upgrades. Two different jobs.

Our Pozi-drive fasteners and our hex-drive inserts address different parts of the system.

The Pozi-drive feature is in the binding fastener: the screw you work with when attaching or removing your binding. The internal 3 mm hex-drive feature is in the insert itself: the part used to drive and position the insert during installation.

Different interfaces. Different jobs. The same focus on the details that make QK hardware work at the bench.

Get the details on our hex-drive insert release.

Good hardware still needs good habits

Use the correct driver, follow the applicable binding and QK instructions, and check your fasteners and finished setup before skiing. Pozi-drive isn't a locking mechanism, a guarantee against damaged screw heads, or permission to exceed the applicable tightening guidance.

Removable doesn't mean maintenance-free. Keep the hardware in good condition, and replace damaged parts rather than working around them.

Keep the feedback coming.

This upgrade started with customers asking for it. So thank you for your feedback!

We build hardware for skiers who use their setups, change their setups, and care about getting the details right. Your experience helps us decide where to put the next round of work.

Find fasteners for your binding, or send us your setup and questions. Let's get the right hardware under your bindings.